Emilie J. Toft Gutter Guards June 09th, 2018 - 21:35:09
Often used in the New England area it is rumored to help prevent damage from sliding snow they became Yankee Gutters. These work extremely well and may be as much as twelve inches wide to catch all the water from the roof. They must be maintained however to prevent any leaks. Leaks will penetrate directly into the house itself since the gutter sits inside the exterior wall line. Properly installed and maintained by proper cleaning these gutters have lasted over a hundred years. All gutters have downspouts of some kind. These come in ten foot straight lengths as well as elbows type A and Type B.
4. Flat solid top with rounded front nose and a trough--fin type with trough. Since the basic fin type fails the next progression was to add a trough. But it doesnt take a college graduate to see that debris that goes into the trough (basic screening system) will either clog the trough or break down and pass into the gutter and clog it. See resource box for photos. 5. Flipping type gutter or rain dispersal units. These require removing your gutters and installing either a gutter with a hinge that gets flipped or fins (installed horizontal to the fascia board) to disperse the water.
Spikes come in both white and dark brown pre-finished head colors to match the gutters. Roof straps are for me the least desirable mounting method. They are used when the fascia board is weak or non-existent. The strap is nailed down into the roofing under the bottom shingle and hangs off the edge of the eave. The gutter is placed inside the strap assembly and the strap is locked into place. I have seen these straps face nailed into the bottom course of shingles but this is highly undesirable and will surely leak as the year pass.
Matching color gutter straps are also available. Downspouts must be secured firmly to the house as falling water places a heavy load on the pipe and fittings and can actually pull a downspout loose from the gutter or house. Once I have the downspouts in a finished configuration that I like I rivet each pipe and fitting together with two matching color rivets. Additional rivets used to secure the straps to the leader pipe leaves a nice looking end product that will not pull apart. Also important to a good gutter system is to provide a way for the water to get from the end of the downspout away from the house foundation.