Celina M. Sondergaard Gutter Guards June 10th, 2018 - 14:50:36
You will need ladders a hammer tape measure four foot level drill with metal bits rivets and rivet gun gutter caulking gutter spikes and ferrules or roof gutter straps. I place one nail every two feet on center starting a couple of inches in from the ends and over the downspout outlet(s) openings. First install both the end caps with caulking and then add the downspout outlets riveting each one in place. If youre using a single ten foot gutter a downspout at one end should be more than sufficient. Gutters may be hung using either nails and ferrules or roof straps.
If you choose the wrong product it can also be nightmarish with flooded basements mildew mold soil erosion and worse yet the be totally dependent on the installing company as you can no longer access your own gutters to clean them. So lets do some research. Basically there are six different types of gutter protection devices: 1. Screening devices which are not really recognized as gutter protection devices. Made of wire metal or plastic they work simply with gravity and require routine ladder maintenance.
Do not drive the spikes all the way. Proceed along the gutter in two foot incremental spaces until reaching the opposite end of the gutter. Get down off your ladder and look at the gutter. Does it tip ever so slightly towards the downspout hole? If it is really noticeable it may be too much tilt. Now is the time to adjust the gutter slope before you drive the spikes completely into the wood. If you are happy with the gutter go ahead and drive the spikes flush with the gutter but do not compress the gutter or ferrules.
How to Install Gutters Gutters come in several different sizes although most people never notice. You may have become accustomed to seeing white and brown gutters on homes but in fact many custom colors are available today. I built a Marine barracks in New York that required all red trims. Louvers vents fascias and soffit materials and yes even the gutters and downspouts were a matching red color. As with window units there are dozens of custom colors to choose from today. Almost all residential applications use a four inch by four inch wide standard gutter and three inch downspouts or leaders.